Hypermizer G

The technologies are backed by 15 years of intensive R&D. It comprises the latest Load Data Collector (LDC) and microprocessor that continually monitors electrical loads and ensuring optimal power is supplied at all times. Savings are from the wastage of kilowatt within the existing electrical circuit, hence savings obtained will no compromise on equipment performance.

Features & Benefits :

Real Power Savings,
Stabilize & Optimize voltage & current supplied to loads,
Reduce Reactive power & Apparent power by 30%-90%,
Improve load Efficiency & Power Factor by 5%-15%,
Filter out frequency noises,
Reduce harmonics and wave-form distortions by 30%-35%,
Reduce heat generated within the loads,
Extend lifespan of electrical equipment as well as reduce repair and maintenance costs.

Features

The Hypermizer is a specially designed Automatic Power Controller that targets lightings and mixed loads. The Load Sensor constantly monitors the supply, usage and wastage power and sends the data through our proprietary load detection mechanism. Our proprietary software then directs the two specially designed coils to trim wastages, reduce consumption and improve efficiency.

The Load Sensor monitors the electrical load for various parameters at 300 cycles per second.
The Load Detector sends the data in digital signals to the Microchip Processor. Our algorithmic software then directs the control circuit to adjust the auto and reactor coil according to the type of electrical load.
The Auto Coil stabilizes and improves the voltage and trims redundant excesses, in line with the current.
The Reactor Coil improves the power factor & efficiency, balances the inter-phase angle., trims current & harmonics and filters frequency noises.

Working together, the three components supply just the right amount of voltage and current to the loads to function optimally, thereby reducing the level of real power usage. On average, the Hyperrmizer has been proven to save 15%-25% of Real Power for lighting and mixed loads.